DEDURIZATOR APA FARA SARE TRIO TAC NEXT SCALE STOP 1-2 TOLI NSS-110-T

Dedurizator fara sare Trio TAC Next Scale Stop NSS-110-T, cu conectare la 1/2 toli – utilizeaza tehnologia fara sare numita Template Assisted Crystallization.

Tested and verified!

Tested by independent laboratory to prevent deposits,  The TAC Next Scale Stop has a 99.6% rating for deposit prevention, the only technology to achieve this performance, being more effective than any other alternative.

TAC certifications, Next Scale Stop: NSF standard 61
     
Recomandat pentru un debit continuu de: 4 l / minut si pentru varfuri de debit pana la 6 / minut.

Maximum recommended hardness: 72.8 German degrees

Note: TAC technology does not work like a classic water softener, by ion exchange and by replacing calcium and magnesium salts with sodium in the water. From this point of view, it should be called a water softener or more correctly a conditioner. So bear in mind that it is not a traditional softener and that the calcium and magnesium ions remain in the water but in a form that stops deposits. So, the hardness of the water will remain the same before and after treatment with TAC.

Dedurizatorul Trio TAC Next Scale Stop NSS-110-T - prevents deposits in installations and protects equipment. In addition, it filters water to a 5 micron grade and dechlorinates water. 

Limescale deposits in the plumbing, block pipes, faucets, destroy the central heating system and boiler. With TAC next NSS-110B, you will save money and have time for yourself, not time for repairs!

Dedurizatorul Trio TAC Next Scale Stop NSS-110-T - By using TAC technology, you remove existing deposits in installations and considerably extend the life of water-using equipment. If you have used untreated hard water, deposits have formed in the installations. Using TAC technology will gradually clean the installation. The classic water softener cannot do this!

No chemicals needed - green - environmentally friendly!
The classic softener uses salt for regeneration, which is not at all economical and environmentally friendly, as this brine has to be discharged to the sewer after the regeneration process.

It's 100% environmentally friendly and economical without buying salt. Because Dedurizatorul Trio TAC Next Scale Stop NSS-110-T not using salt, you'll save money that you can use for anything else.

Minimum maintenance and low costs
Classical softening plants contain electronic or mechanical control valves that need maintenance and periodic cleaning. This requires specialists, which means costs for you. Dedurizatorul Trio TAC Next Scale Stop NSS-110-T contains no moving parts so absolutely nothing can wear.

No electricity - installed anywhere
Dedurizatorul Trio TAC Next Scale Stop NSS-110-T, it doesn't use electricity, and it doesn't discharge water to the sewer. So it can be installed anywhere!

Cost savings
Dedurizatorul TAC Trio TAC Next Scale Stop NSS-110-T – it pays for itself in time, because you no longer buy salt, you no longer use electricity, you no longer pour water into the sewer, pumped by electricity or paid to the water authority!

Did you know that 1 mm of limescale in your boiler or central heating system reduces the heating output by 10%? And this deposition occurs in less than a year! And in three years it will reduce the heating output by up to 241TP33T!

Replacement parts
Because nothing in this world lasts forever, the filtering cartridges have to be changed. 

Filtre incluse in modelul Trio TAC Next Scale Stop NSS-110-T:

• 20 microni – fibre din polipropilena presate – cartus bacteriostatic – pentru filtrare sediment, mal, nisip, rugina;
• carbune activat bloc pentru declorinare – bateriostatic;
• TAC anti-scaling TAC

Installation conditions:

– se va instala fie inaintea unui boiler, fie inaintea unui echIpament ce nu necesita debit mai mare de 5 litri/minut. Nu este potrivit pentru toata casa!!!
- to be installed before any domestic or heating equipment, which is intended to be protected from limescale;
- if the installation is made of copper, the water will be used for four weeks before it is treated and run through the Dedurizatorul Trio TAC Next Scale Stop NSS-110-T. TAC technology is not allowed to come into contact with copper. After use for four weeks, the copper pipes will be passivated, and this will prevent copper ions from entering the TAC filter medium;
- we recommend the installation of a bypass, consisting of pipes and three valves, in case of service or change of filter medium.

Water quality because dedurizatorul Trio TAC Next Scale Stop NSS-110-T to be used:

Feed water/treatment water must meet the following conditions:

pH 6.5 - 8.5
Maximum hardness - 72.8 German degrees
Min/max pressure -1-5 bar (we recommend using with a max. pressure of 4.5 bar)
Temperature - 5°C to 43°C
Chlorine - < 3ppm
Iron (maximum) - 0.3 mg/l
Manganese (maximum) - 0.05 mg/l
Copper - 1.3 mg/l
Oil/petrol and hydrogen sulphide - not allowed
Polyphosphate - not allowed
Silicon (maximum) - 10 ppm

If the water is from a controlled source (waterworks) and meets drinking water standards, it is not necessary to carry out a water analysis.

Technical specifications:
Conexiuni: 1/2″ IN/OUT;
Lungime: 35  cm
Latime: 13,5 cm;
Inaltime: 37,5  cm.

Maintenance:

Two cartridges will be changed every 3 - 6 months

The filter cartridge for anti-scale treatment will be changed every 2 years.

2-year guarantee

Assembled in Romania. We use TAC Next Scale Stop (UK).