DEDURIZATOR BI-BLOC FLECK 30-5600 SXT1

Dedurizator BI-BLOC FLECK 30-5600 SXT1, automat, volumetric proportional (consum redus de sare).

This model is the most widely used water softener in the USA and is the best choice you can make because of its exceptional reliability. All the materials it is made of are approved for contact with drinking water. But the most important components like the control head and cationic resin are NSF certified.

Cateva dintre avantajele unice ale dedurizatorului automat BI-BLOC Fleck 30-5600 SXT1

• Fleck Valve Driven Dedurizer, made in USA and NSF certified;
• Green Resin premium food grade resin with NSF/ANSI 61 certification;
• Equipped with a mixing valve to adjust the hardness of the water reaching the house;
• Equipped with bypass for service situations;
• Equipped with non-volatile EEPROM memory. Once programmed, this memory will not erase even if there is a power failure;
• Dotat cu baterie interna ce retina ora setata pana la 24 H;
• Automatic identification of problems and errors on display;
• Prepare the brine with softened water;

Important! La achizitia dedurizatorului, acesta va fi programat de catre echipa noastra. Practic, vei primi dedurizatorul deja setat, fara sa ai batai de cap cu programarea acestuia cu conditia sa ne comunici duritatea apei inainte de livrare iar daca apa este din reteua publica, sa ne comunici localitatea sau orasul. Tot ce vei mai avea de facut este sa-l instalezi si sa-i setezi (foarte simplu) ora curenta. In cazul in care vei avea nevoie de suportul nostru, ne poti suna sau scrie un mesaj. Suntem pregatiti pentru a raspunde oricarei intrebari tehnice.

Service during the 3-year warranty period

If the water softener is installed far away from Bucharest, we will try to identify the problem and send you the defective part, absolutely free of charge. And if the water softener is installed in the Bucharest/Ilfov area, you can request an intervention for a fee. Spare parts are free of charge during the warranty period, but the intervention of a technician on site is against cost. Of course, everything is free of charge if the water softener arrives in our service center in Bucharest. But we know this is complicated for you and that's why we offer you options. What is important to remember: we won't leave you alone with a possible problem and you will have all the necessary technical support until the problem is solved. However, taking into account that this softener is equipped with the Fleck USA control valve, we expect the softener to run for many years without any problems.

Garantia „MULTUMIRE DEPLINA” = Garantia ca dedurizatorul BI-BLOC FLECK 30-5600 SXT1 are efectul promis.

Dedurizatorul BI-BLOC FLECK 30-5600 SXT1 functioneaza si de aceea oferim acest echipament cu GARANTIE DE RETURNARE DE 30 ZILE. Scopul acestui tip de garantie este unul singur, multumirea ta.
Noi garantam ca dedurizatorul BI-BLOC FLECK 30-5600 SXT1 va functiona si pentru tine. Daca nu esti multumit, in cele 30 de ZILE cu performantele sistemului, te rugam sa ne contactezi. Daca nu putem rezolva problema ce te nemultumeste, banii pe echipament vor fi inapoiati in intregime dupa ce ne vei inapoia echipamentul. Nu vei plati nici macar costul de transport!

 

Prin utilizarea dedurizatorului BI-BLOC FLECK 30-5600 SXT1, te vei bucura de urmatoarele beneficii:

* Energy saving
* A great daily shower
* Fine skin and soft hair
* Significantly increase the maintenance and service period for central heating, boiler, washing machine, sink batteries, etc.
* Save money by reducing detergent consumption
* Cost scazut de mentenanta pentru statia de dedurizare BI-BLOC FLECK 30-5600 SXT1
* Fully automatic operation

Specificatii tehnice dedurizator BI-BLOC FLECK 30-5600 SXT1:

Presiune minima: 2,5 bari;
Presiune maxima: 5 bari
Debit maxim de tratare: 1,8 mc/h
Maximum permitted flow: 4.4 mc/h
Minimum temperature: 2°C
Maximum temperature: 46 °C
Input/output connection: 1″ internal thread
Furtun 2 metri pentru scugere cu diametrul de 3/8″

Other technical specifications:

Potrivit pentru 4 – 6 – 8 – 10 persoane (depinde de nivelul de duritate a apei):
Consum de sare la regenerare: 3,3 kg
Consum de apa la fiecare regenerale: ~110 litri

Dimensions:

Tanc dedurizator (cel albastru): Inaltime: 110 cm; Diametru: 26,5 cm
Vas pentru sare: Inaltime: 80 cm; Diametru: 40 cm
Cele doua corpuri unul langa altul: Inaltime: 110 cm x Lungime: 65 cm x latime: 40 cm

Instalare dedurizator BI-BLOC FLECK 30-5600 SXT1: 

The water softener must treat all water entering the house or other applications before any consumer. It shall be mounted on the cold water pipe, immediately after the hydro or pump and before the central heating plant and boiler. It is recommended that a sediment filter to be mounted before the softener. This will ensure your peace of mind and long trouble-free operation. Without a sediment filter, there is a risk of dirt in the water clogging the injectors and the channels through which the softener regenerates. It is not advisable to use softened water for watering your garden and plants. There is a certain amount of sodium in softened water that can affect plant growth and development. For this, ask your installer to install a tap in front of the water softener, where you can connect your garden hose.

Montaj si punere in functiune dedurizator BI-BLOC FLECK 30-5600 SXT1:

On customer's request we provide installation and commissioning team. In case our customer wishes to realize the installation himself or with his own installer, this is possible. The AZURA team offers installation diagram and technical book. In addition, we guarantee technical assistance by phone and by e-mail until the equipment is installed and working at optimal parameters.

*at commissioning the customer must provide pill salt (softener salt), minimum 25 kg (one bag). This salt can be found in major DIY stores and other retailers. On request we can recommend a salt supplier.

Connection to the drain:

The drain for the softener shall be below the height of the softener when possible. Connection shall be made to a minimum 1" drain. The maximum distance between the softener and drain shall be no more than 20 feet.

Residual hardness adjustment:

Residual hardness refers to the hardness of the water after it has been treated and run through the softener. You may not want the hardness of your water to be below 1 degree German, which makes your water feel very soft. The manufacturer does not recommend a certain residual hardness. We recommend a residual hardness between 3 - 6 degrees German. If you want this, please specify this to our team and ask us how you can adjust the residual hardness. The water softener is equipped with a residual hardness adjustment tap. In this case it is advisable to purchase a hardness testto make the adjustment correctly.

Warnings!

Dedurizatoarele BI-BLOC FLECK 30-5600 SXT1 nu sunt sisteme de filtrare si potabilizare a apei cu scopul de a rezulta apa potabila. Daca apa ce necesita tratare cu sistemele noastre vine din reteaua publica de apa, atunci cu siguranta, calitatea acesteia va fi imbunatatita.

If the water has not been previously treated and does not come from the public network, being the source drilled or surface water, then a water analysis report is required from a physico-chemical and bacteriological point of view. Only by knowing all the parameters of the water can the right equipment be chosen for water potabilization. Contact us for a proper treatment of your water!

Other warnings:

Do not use the water softener with hot water, especially at temperatures above 46°C.

The temperature of the room where the softener is placed should be between 2°C - 50°C.

The system should not be installed in a damp room. Make sure that you have adequate ventilation where there is no moisture.

Recommendations for maintenance and sanitation:

Check salt levels - monthly
Check the water hardness level at the inlet - monthly
Check the water hardness level at the station outlet - monthly
Sanitation - annually (by the service team)
Salt tank cleaning - annually (recommended to be done by the service team)
General technical check - annually (by service team)

Attention!

Increased sodium in water

Most of the sodium we consume comes from food. Because salt is an excellent preservative, it is added to food. The sodium consumed with water is relatively small compared to that in food. Even so, it is very important to always keep in mind that water softeners increase the sodium level in water compared to untreated water.

Maximum regulated level of sodium in water is 200 mg/l (law no. 311 of June 28, 2014 amending and supplementing law no. 4208/2002 on drinking water quality). It is possible that in some cases the softener may add a higher level of sodium than the regulated level. If this is the case or if there are people who are not allowed to consume salt, it is better to install a reverse osmosis filter in the kitchen.

You can check on our website reverse osmosis filters.

Softener warranty:

Toate dedurizatoarele din seria BI-BLOC FLECK 30-5600 SXT1 sunt acoperite de garantie timp de trei ani de zile impotriva oricarui defect de fabricatie.

Water hardness analysis:

In case you do not know the hardness level of your water, please contact us by phone or email. If possible, we will come to you to perform a hardness test and if the distance is too far, you can send us 500 ml of water to test its hardness. Depending on the result of the analysis and other parameters requested by us, we will indicate you the suitable softener model.

Not sure if this softener is right for you? Contact us for advice: Contact