TAC NEXT SCALE STOP NSS-110B SALT FREE WATER SOFTENER

Dedurizatorul fara sare TAC Next Scale Stop NSS-110B, uses salt-free technology called Template Assisted Crystallization.

Tested and verified!

Tested by independent laboratory to prevent deposits,  The TAC Next Scale Stop has a 99.6% rating for deposit prevention, the only technology to achieve this performance, being more effective than any other alternative.

TAC certifications, Next Scale Stop: NSF standard 61.

Recommended for a continuous flow of: 10 l/minute and for peak flows up to 15 l/minute.

Maximum recommended hardness: 72.8 German degrees

Note: TAC technology does not work like a classic water softener, by ion exchange and by replacing calcium and magnesium salts with sodium in the water. From this point of view, it should be called a water softener or more correctly a conditioner. So bear in mind that it is not a traditional softener and that the calcium and magnesium ions remain in the water but in a form that stops deposits. So, the hardness of the water will remain the same before and after treatment with TAC.

Dedurizator TAC Next Scale Stop NSS-110B

Previne depunerile in instalatii si protejeaza echipamentele.

Limescale deposits in the plumbing, block pipes, faucets, destroy the central heating system and boiler. With TAC next NSS-110B, you will save money and have time for yourself, not time for repairs!

Dedurizatorul TAC Next Scale Stop NSS-110B - By using TAC technology, you remove existing deposits in installations and considerably extend the life of water-using equipment. If you have used untreated hard water, deposits have formed in the installations. Using TAC technology will gradually clean the installation. The classic water softener cannot do this!

No chemicals needed - green - environmentally friendly!
The classic softener uses salt for regeneration, which is not at all economical and environmentally friendly, as this brine has to be discharged to the sewer after the regeneration process.

It's 100% environmentally friendly and economical without buying salt. Because Dedurizatorul TAC Next Scale Stop NSS-110B, not using salt, you'll save money that you can use for anything else.

Minimum maintenance and low costs
Classical softening plants contain electronic or mechanical control valves that need maintenance and periodic cleaning. This requires specialists, which means costs for you. Dedurizatorul TAC Next Scale Stop NSS-110B contains no moving parts so absolutely nothing can wear.

No electricity - installed anywhere
Dedurizatorul TAC Next Scale Stop NSS-110B, it doesn't use electricity, and it doesn't discharge water to the sewer. So it can be installed anywhere!

Cost savings
Dedurizatorul TAC Next Scale Stop NSS-110B – se plateste singur in timp, deoarece nu mai cumparati sare, nu mai utilizati curent electric, nu mai deversati apa la canalizare pompata tot cu ajutorul curentului sau platita la regia de apa!

Did you know that 1 mm of limescale in your boiler or central heating system reduces the heating output by 10%? And this deposition occurs in less than a year! And in three years it will reduce the heating output by up to 241TP33T!

Replacement parts
Pentru ca nimic in aceasta lume nu dureaza la infinit, cartusul filtrant trebuie schimbat o data la 2 ani. Acest mediu filtrant este singurul consumabil, fara alte reparatii si piese de schimb ca in cazul dedurizatoarelor clasice!

Installation conditions:

- will be installed at the entrance of the house on the main cold water pipe;
- if there is more than one treatment/filtration equipment, install the last one in the filtration scheme;
- to be installed before any domestic or heating equipment, which is intended to be protected from limescale;
- if the installation is made of copper, the water will be used for four weeks before it is treated and run through the Dedurizatorul TAC Next Scale Stop NSS-110B. Tehnologia TAC nu are voie sa intre in contact cu cuprul. Dupa utilizarea apei patru saptamani, conductele de cupru vor fi pasivizate, iar acest lucru va impiedica ca ionii de cupru sa ajunga in mediul filtrant TAC.
– recomandam instalarea unui filtru de sediment, cu grad de filtrare intre 5 – 20 microni inaintea dedurizatorului TAC Next Scale Stop NSS-110B. In acest fel, mediul filtrant TAC va ramane curat si performant.
– in cazul in care apa este clorinata (retele publice de apa) recomandam instalarea unui sistem de filtrare cu carbune activat;
- we recommend the installation of a bypass, consisting of pipes and three valves, in case of service or change of filter medium.

Modele TAC Next Scale Stop NSS-110B:

• NSS-110B
• NSS-110B Bypass

Water quality because dedurizatorul TAC Next Scale Stop next NSS-110B sa poata fi utilizat cu succes

Feed water/treatment water must meet the following conditions:

pH: 6.5 – 8.5
Duritate maxima: 72.8 grade germane
Presiune apa: 15psi to 100psi (103 kPa to 6.9 bar)
Temperatura: 5°C to 43°C
Clor: < 3ppm
Fier (maxim): 0.3 mg/l
Mangan (maxim): 0.05 mg/l
Cupru (maxim): 1.3 mg/l
Ulei/petrol si hidrogen sulfurat: nu sunt permise
Polifosfat: nu este permis
Siliciu (maxim): 10 ppm

If the water is from a controlled source (waterworks) and meets drinking water standards, it is not necessary to carry out a water analysis.

Technical features:

Connections: 1″ IN/OUT;
Inaltime carcasa: 36 cm
Diametru carcasa 19 cm
Inaltime carcasa cu suport montat: 45,5 cm
Presiune min./max. 1/6 bar.
Temperatura min./max. 2/45°C

Maintenance:

Se va schimba cartusul filtrant o data la fiecare 2 ani. Timp de doi ani nu exista mentenanta si interventie service!

2-year guarantee

Assembled in Romania. We use TAC Next Scale Stop (UK).