FLECK 25-5600 SXT1 MONOBLOC SOFTENER 25-5600 SXT1

FLECK 25-5600 SXT1 25-5600 SXT1, automatic, volumetric proportional (low salt consumption).

This model is the most widely used water softener in the USA and is the best choice you can make because of its exceptional reliability. All the materials it is made of are approved for contact with drinking water. But the most important components like the control head and cationic resin are NSF certified.

Some of the unique advantages of the Fleck 25-5600 SXT1 automatic monobloc water softener

• Fleck Valve Driven Dedurizer, made in USA and NSF certified;
• Green Resin premium food grade resin with NSF/ANSI 61 certification;
• Equipped with a mixing valve to adjust the hardness of the water reaching the house;
• Equipped with bypass for service situations;
• Equipped with non-volatile EEPROM memory. Once programmed, this memory will not erase even if there is a power failure;
• Equipped with internal battery that retains the set time up to 24 H;
• Automatic identification of problems and errors on display;
• Prepare the brine with softened water;

Important! When you purchase the softener, it will be programmed by our team. Basically, you will receive the water softener already set, without having the hassle of programming it, provided that you let us know the water hardness before delivery and if the water is from the public water supply, let us know the city or town. All you have to do is install it and set (very simple) the current time. If you need our support, you can call us or write us a message. We are ready to answer any technical questions.

Service during the 3-year warranty period

If the water softener is installed far away from Bucharest, we will try to identify the problem and send you the defective part, absolutely free of charge. And if the water softener is installed in the Bucharest/Ilfov area, you can request an intervention for a fee. Spare parts are free of charge during the warranty period, but the intervention of a technician on site is against cost. Of course, everything is free of charge if the water softener arrives in our service center in Bucharest. But we know this is complicated for you and that's why we offer you options. What is important to remember: we won't leave you alone with a possible problem and you will have all the necessary technical support until the problem is solved. However, taking into account that this softener is equipped with the Fleck USA control valve, we expect the softener to run for many years without any problems.

"FULL MONOBLOC FLECK 25-5600 SXT1 MONOBLOC FLECK 25-5600 SXT1 MONOBLOC FLECK 25-5600 SXT1 has the promised effect.

The MONOBLOC FLECK 25-5600 SXT1 MONOBLOC FLECK 25-5600 SXT1 is working and that's why we offer this equipment with a 30-DAY RETURN GUARANTEE. The purpose of this type of guarantee is only one, your satisfaction.
We guarantee that the MONOBLOC FLECK 25-5600 SXT1 MONOBLOC FLECK 25-5600 SXT1 softener will work for you. If you are not satisfied within 30 DAYS with the system's performance, please contact us. If we can't solve the problem you are dissatisfied with, we will refund your money in full after you return the equipment to us. You won't even pay the transportation cost!

 

By using the MONOBLOC FLECK 25-5600 SXT1 MONOBLOC FLECK 25-5600 SXT1 water softener, you will enjoy the following benefits:

* Energy saving
* A great daily shower
* Fine skin and soft hair
* Significantly increase the maintenance and service period for central heating, boiler, washing machine, sink batteries, etc.
* Save money by reducing detergent consumption
* Low maintenance cost for the MONOBLOC FLECK 25-5600 SXT1 MONOBLOC FLECK 25-5600 SXT1 softener station
* Fully automatic operation

Technical specifications MONOBLOC FLECK FLECK 25-5600 SXT1:

Minimum pressure: 2 bar;
Maximum pressure: 8.5 bar
Maximum treatment flow: 1,5 mc/h
Maximum permitted flow: 4.4 mc/h
Minimum temperature: 2°C
Maximum temperature: 46 °C
Input/output connection: 1″ internal thread
2 meter drain hose 1/2" diameter

Other technical specifications:

Suitable for 4 - 6 people (depending on water hardness):
Regeneration salt consumption: 2.75 kg
Water consumption per regeneration: ~100 liters

Dimensions: Height: 1120 mm; Length and depth: 320 mm x 480 mm

MONOBLOC FLECK 25-5600 SXT1 MONOBLOC softener installation: 

The water softener must treat all water entering the house or other applications before any consumer. It shall be mounted on the cold water pipe, immediately after the hydro or pump and before the central heating plant and boiler. It is recommended that a sediment filter to be mounted before the softener. This will ensure your peace of mind and long trouble-free operation. Without a sediment filter, there is a risk of dirt in the water clogging the injectors and the channels through which the softener regenerates. It is not advisable to use softened water for watering your garden and plants. There is a certain amount of sodium in softened water that can affect plant growth and development. For this, ask your installer to install a tap in front of the water softener, where you can connect your garden hose.

Installation and commissioning of the MONOBLOC FLECK 25-5600 SXT1 MONOBLOC FLECK 25-5600 SXT1 water softener:

On customer's request we provide installation and commissioning team. In case our customer wishes to realize the installation himself or with his own installer, this is possible. The AZURA team offers installation diagram and technical book. In addition, we guarantee technical assistance by phone and by e-mail until the equipment is installed and working at optimal parameters.

*at commissioning the customer must provide pill salt (softener salt), minimum 25 kg (one bag). This salt can be found in major DIY stores and other retailers. On request we can recommend a salt supplier.

Connection to the drain:

The drain for the softener shall be below the height of the softener when possible. Connection shall be made to a minimum 1" drain. The maximum distance between the softener and drain shall be no more than 20 feet.

Residual hardness adjustment:

Residual hardness refers to the hardness of the water after it has been treated and run through the softener. You may not want the hardness of your water to be below 1 degree German, which makes your water feel very soft. The manufacturer does not recommend a certain residual hardness. We recommend a residual hardness between 3 - 6 degrees German. If you want this, please specify this to our team and ask us how you can adjust the residual hardness. The water softener is equipped with a residual hardness adjustment tap. In this case it is advisable to purchase a hardness testto make the adjustment correctly.

Warnings!

The MONOBLOC FLECK 25-5600 SXT1 MONOBLOC FLECK 25-5600 SXT1 are not water filtration and purification systems for the purpose of producing drinking water. If the water that needs to be treated with our systems comes from the public water supply, then its quality will certainly be improved.

If the water has not been previously treated and does not come from the public network, being the source drilled or surface water, then a water analysis report is required from a physico-chemical and bacteriological point of view. Only by knowing all the parameters of the water can the right equipment be chosen for water potabilization. Contact us for a proper treatment of your water!

Other warnings:

Do not use the water softener with hot water, especially at temperatures above 46°C.

The temperature of the room where the softener is placed should be between 2°C - 50°C.

The system should not be installed in a damp room. Make sure that you have adequate ventilation where there is no moisture.

Recommendations for maintenance and sanitation:

Check salt levels - monthly
Check the water hardness level at the inlet - monthly
Check the water hardness level at the station outlet - monthly
Sanitation - annually (by the service team)
Salt tank cleaning - annually (recommended to be done by the service team)
General technical check - annually (by service team)

Attention!

Increased sodium in water

Most of the sodium we consume comes from food. Because salt is an excellent preservative, it is added to food. The sodium consumed with water is relatively small compared to that in food. Even so, it is very important to always keep in mind that water softeners increase the sodium level in water compared to untreated water.

Maximum regulated level of sodium in water is 200 mg/l (law no. 311 of June 28, 2014 amending and supplementing law no. 4208/2002 on drinking water quality). It is possible that in some cases the softener may add a higher level of sodium than the regulated level. If this is the case or if there are people who are not allowed to consume salt, it is better to install a reverse osmosis filter in the kitchen.

You can check on our website reverse osmosis filters.

Softener warranty:

All FLECK 25-5600 SXT1 MONOBLOC FLECK 25-5600 SXT1 series softeners are covered by a three-year warranty against any manufacturing defects.

Water hardness analysis:

In case you do not know the hardness level of your water, please contact us by phone or email. If possible, we will come to you to perform a hardness test and if the distance is too far, you can send us 500 ml of water to test its hardness. Depending on the result of the analysis and other parameters requested by us, we will indicate you the suitable softener model.

Not sure if this softener is right for you? Contact us for advice: Contact