PURIFICATOR PENTRU APA CU BACTERII CLAIRIFY RO10 QUANTUM DISINFECTION T33 TF

Purificator pentru apa cu bacterii, cel mai avansat sistem de purificare a apei pentru problema bacteriilor. Clairify RO10 Quantum Disinfection, produs in SUA cu certificare NSF.

Did you know that the No. 1 problem in Romania with regard to well, spring and surface water is the presence of bacteria in the water? Most often pathogenic bacteria such as E. coli, Presudomonas Aeruginosa, Clostridium or coliform bacteria.

Purificatorul pentru apa Clairify RO10 Quantum Disinfection™ este solutia tehnica pentru ca apa ta sa nu contina bacterii.

Da, Clairify RO10 Quantum Disinfection este purificatorul care iti ofera apa fara bacterii. Potrivit pentru a se instala ca post filtru pentru sisteme de purificatoare cu osmoza inversa/nanofiltrare/ultrafiltrare/microfiltrare. Testat si certificat NSF (cea mai stricta certificare din SUA).

Modelul T33 inseamna un filtru cu diametrul de 2 toli ce se instaleaza dupa membrana de osmoza inversa/nanofiltrare/ultrafiltrare, de aceea se numeste si Post Filtru. Rolul lui este de a dezinfecta apa (eliminare bacterii). In acest caz, filtrul T33 contine materian filtrant patentat, certificat NSF, numit Quantum Disinfection.

TF inseamna tipul de conexiune. THREAD FEMALE = conectare pe baza de filet de tip mama. In acest caz filetul este de 1/4 toli. Cu alte cuvinte este necesara cupla de tip Tata. Pe filetul cuplei, se va adauga intotdeauna banda de teflon iar cupla se va strange doar cu mana, fara scule de forta (cleste, patent).

Compared to any other disinfection technology (chlorine, UV, ultrafiltration) it is clearly superior because:

• Chlorine requires ~30 minutes of contact with water for disinfection;
• UV (ultraviolet light) has a disinfection percentage of 10%-80%, never 99.99%;
• Ultrafiltration produces a biofilm where bacteria grow inside the filter.

Unde se instaleaza Clairify RO10 Quantum Disinfection™?

Suitable for one point of consumption: ideally installed with another filtration system as the last stage. 

Certificari pentru Clairify RO10 Quantum Disinfection™

• NSF NSF/ANSI 42 NSF/ANSI 42 component certification for materials only (# Certificate: C0292640-01);
• tested by IAPMO for NSF/ANSI 61 (Certificate #: 23033);
• MOH certification - China (Certificate #: 2015KF2513).

Performanta pentru Clairify RO10 Quantum Disinfection™

The water disinfection performance is Log 6, that is 99.9999%. This is the best water disinfection performance for a water disinfection device, internationally.

Ce tip de microorganisme distruge Clairify RO10 Quantum Disinfection™?

Bacteria such as: E. coli, Pseudomonas Aeruginosa, Clostridium, coliform bacteria and colonies of bacteria, viruses, parasites such as Cryptosporidium and Giardia.

Below is a detailed table:

MICRO-ORGANISMS	TYPE OF MICRO-ORGANISMS	BEST EFFICIENCY Log reduction	LABORATORY CERTIFICATE
Pseudomonas aeruginosa	Bacteria	Log 7	PIL, Proteus
PIL, Proteus	Bacteria	Log 7	EPA, Avazyme, Eurofine, Microbac, Proteus, Ackuritlabs, GDCM, BFML
Staphylococcus aureus	Bacteria	Log 7	Staphylococcus aureus
Eterocococcus hirae	Bacteria	Log 10	Ackuritlabs, PIL, Proteus
Legionella adelaidensis	Bacteria	Log 6	Proteus
Citrobacter sp	Bacteria	Log 5	Citrobacter sp
MS2	Virus	Log 6	Avazyme, QFT Laboratory
Candida albicans	Drojdie	Log 5	Proteus
Anabaena constricta	Seaweed	Log 5	Proteus
Cryptosporidium	Protozoar	Log 5	Eurofines

Quick guide to Log reduction:

Log 5 = reduces microorganisms by 99,999%
Log 6 = reduces microorganisms by 99.9999%
Log 7 = reduces microorganisms by 99.9999999%
Log 8 = reduces microorganisms by 99.99999999%
Log 9 = reduces microorganisms by 99.99999999999%
Log 10 = reduces microorganisms by 99.999999999999%

Cu ce tip de apa poate fi utilizat purificatorul Clairify RO10 Quantum Disinfection™?

Both with well water and with surface water or public mains water. The water must meet minimum conditions as follows:

• pH 3.5 - 8.5
• Total Suspended Solids: TSS (mg/L) < 5
• Suspension size (μ) < 5
• Dissolved solid suspensions: TDS (mg/L) < 1,000
• Turbidity (NTU) < 0.01
• Nitrate (mg/L) < 20
• Phosphate (mg/L) < 10
• Alkalinity (mg CaCO3/L) < 600
• Chlorides (mg/L) < 200
• Chlorine (mg/L) < 2
• Brom (mg/L) < 0.1
• Fluoride (mg/L) < 5
• Hardness < (dH) 48
• Heavy metals (mg/L) < 100

Specificatii tehnice purificatorul Clairify RO10 Quantum Disinfection™

• • Minimum pressure 20 psi/1.4 bar
  • Maximum pressure 125 psi/8.6 bar
  • Minimum temperature 4.4 °C
  • Maximum temperature 38 °C
  • Maximum flow: 0.5 GPM, 2 L/min.
  • Disinfection capacity: 11000 liters or 1 year
    
  • Connections: 1/4″ quick couplings

Dimensions: W 25 cm x D 5 cm

Cum functioneaza purificatorul Clairify RO10 Quantum Disinfection™?

The Quantum Disinfection treatment medium is positive which causes electrons to be attracted. The water simply passes through the filter medium and the negatively charged mycoorganisms are instantly destroyed.

Unde este produs purificatorul Clairify RO10 Quantum Disinfection™?

Purifiers are made in the USA. Quantum Disinfection™ disinfection media is made in Canada.

Warranty against manufacturing defects: 2 years