UV40 WATER STERILIZER WITH 3/4″ CONNECTION

UV40 water sterilizer with 3/8″ connections

Ultraviolet sterilizers are specially designed for disinfecting water for drinking water. This equipment is commonly used to disinfect water throughout the home. The purpose of the ULTRAVIOLET series sterilizers is to disinfect all water used in the home. Like any equipment for filtering and purifying water, the ultraviolet sterilizer is chosen according to the flow rate of the treated water.

Technical features:

Model: UV40
Maximum flow: 2720 l/h
Number of lamps: 1 pcs.
Power: 40W
Connections: 3/4″ external thread
Diameter: 63.5 mm
Length: 924 mm

The ultraviolet sterilizer is indicated to be used for any water, whether the source is from the public water supply or from your own source (well/well water).

The efficiency of the ultraviolet sterilizer is closely linked to the quality of the feed water. For maximum efficiency, it is recommended that the water to be treated has the following parameters:

Maximum hardness: 7 degrees German
Iron <0,2 mg/l
Hydrogen sulfide <0,05 mg/l
Manganese < 0,05 mg/l
Suspensions < 10 mg/l

If the water does not meet the conditions mentioned above, it is necessary to treat it beforehand with specific media and suitable equipment.

About editing:

The UV lamp sterilizer has been designed so that it can be mounted vertically/horizontally. Ideally, it will be mounted vertically and with the lamp connector on top.

It will only be installed on cold water!

Suggestions:

It is recommended to install a 5 micron fine filter before the UV sterilizer.
If the water quality requires more than one treatment equipment, the sterilizer will be installed as the last stage of treatment before supplying water to the house.

The UV sterilizer is installed after the hydrophor, like any other water filtration and treatment equipment.
It is advisable to disinfect water piping with sodium hypochlorite.

If there are power interruptions or oscillating voltage, it is recommended to install a current stabilizer.

What is the UV40 sterilizer made of?

- stainless steel housing - 1 pcs;
- quartz sheath - 1 pc;
- ballast (transformer) - 1 pc;
- UV lamp - 1 pcs;
- power cable - 1 pc;
- clamp - 2 pcs;
- o-ring - 2 pcs.

Lifespan:

The UV Sterilizer contains a lamp that has a lifespan of 9000 hours, about one year. After 9000 hours, the lamp must be changed or the sterilizer will become ineffective.

Caution! Direct or reflected exposure to ultraviolet light will cause painful eye and skin irritation. Persons who may be accidentally exposed should wear special goggles, gloves and suitable protective clothing.

Final note: based on our experience, the disinfection rate with a UV sterilizer is between 10% - 80%. Of course, this rate is influenced by the type of sterilizer, the flow rate and the physico-chemical conditions of the water. In reality, the disinfection rate with a UV sterilizer can be lower than 10% but also higher than 80%.

Warranty: the warranty period is two years, except the replacement UV lamp which is a consumable.