SHOWER FILTER WITH KDF AND GAC IONFILTER

SHOWER FILTER WITH KDF AND GAC IONFILTER - incorporates the most widely used filtration technologies for shower filters: Granular activated carbon obtained from coconut and KDF 55.

It is a filter made of durable ABS plastic.

Indeplineste 4 mari functii:

1. Reduce clorul rezidual
2. Reduce metalul greu
3. Reduce hidrogenul sulfurat
4. Inhiba dezvoltarea bacteriilor

Ce NU filtreaza:

• Nu poate filtra apa colorata de la mal sau de la rugina
• Nu dedurizeaza apa. Duritatea apei ramane la acelasi nivel
  
• Nu reduce efectele apei dure.

NOTA: niciun filtru de dus nu poate deduriza apa. Cantitatea de material filtrant este mult prea mica pentru a putea face asta!

About filter media from ION FILTER shower filter

Contains the following filter media:

1. KDF 55 - filters out heavy metals (lead, iron, mercury, copper, hydrogen sulfide, chlorine). It has a bacteristatic role and a role to boost the filtering capacity of activated carbon. Works by electrochemical reaction (REDOX reaction - by oxidation - reduction).
2. Granular activated carbon from coconut shells. It filters chlorine, trihalomethane, organic substances, herbicides, pesticides and many other substances. Works by adsorption.

Technical specifications:

Recommended flow rate for efficient filtration: 3.78 liters/minute
Water temperature: up to 60 C
Filtration capacity: about 20000 liters. Depends on water quality.
Filtration capacity expressed in time: 5 months for 2 persons, 1 shower/day.
Length without external threads: 11 cm
Length with external threads: 13 cm
Diameter: 9.2 cm

Guide to reverse filter backwashing

1. If the flow rate of the shower water drops significantly, it is possible that the filter is clogged with dirt, sediment, rust, sand, debris, etc...;
   2. Remove the filter from the connections;
   3. Turn it upside down and install it;
   4. Turn on the shower;
   5. At first the water will be dirty. Turn the water on and off repeatedly until the water comes out clean;
   6. Reinstall the filter as before;
   7. Repeat the procedure described above whenever the water flow rate decreases.

Installation guide:

1. Unscrew and remove the shower hose. The hose must be disconnected from the bathtub battery;
   2. Place the shower filter between the battery and the hose. It can only be installed one way so you can't go wrong.
   3. Screw the filter onto the battery thread;
   4. Screw the hose onto the thread of the shower filter;
   5. Turn on the water. The first time the filter is switched on, dirty water will come out. This is because the clean water flow cleans the activated carbon from dust. Let the water flow through the filter until it clears.

Country of origin: Spain